PCTG vs PETG: which one should you use?

They are close cousins. Here is how they differ and how to choose.

The short answer

Many PCTG grades are selected for applications requiring higher impact resistance than standard PETG, and some transparent PCTG grades can produce highly transparent prints when printed and processed appropriately. PETG is usually easier to find, comes in many more colors and blends, and is a well-understood choice for a wide range of functional parts.

Side-by-side

PETGPCTG
FamilyGlycol-modified copolyesterGlycol-modified copolyester
Impact toughnessGoodMany PCTG formulations are marketed for increased impact resistance compared to standard PETG
ClarityGood in transparent gradesSome transparent grades can produce highly transparent prints when printed and processed appropriately
Typical nozzle rangeAbout 220–250 °CMany PCTG filaments print around 230–270 °C, but always begin with the filament maker's recommendation.
EnclosureUsually not neededUsually not needed
StringingCan stringCan string
Chemical resistanceResists many common chemicals; varies by brand and chemical, so check the maker's dataVaries by brand and chemical; check the maker's data
FlexibilitySome flex before breaking; varies by brandOften marketed as less brittle than standard PETG; varies by brand
Ease of printingWidely considered approachable, with many community profilesSimilar to PETG for many users; often needs somewhat higher nozzle temperatures
Colors & blendsVery wide range, including fiber-filled and specialty blendsFewer options from fewer brands

These ranges are general guidance only. Every brand and color behaves a little differently, so start with your filament maker's recommended settings and adjust from there, staying within the limits of your printer and build surface.

What they have in common

Both are copolyesters with similar chemistry, so the same printer setup is a good starting point for both: a heated bed, moderate part cooling, and a build surface that releases the part cleanly. Neither usually needs an enclosure.

Choose PCTG if…

Choose PETG if…

Where to get PETG

PETG USA stocks basic, matte, silk, transparent, glass-fiber, carbon-fiber, and flame-retardant PETG. If PETG fits your part, it's an easy place to start.